Help Center

A sticker won't hold on a pipe or tank that's wet with condensation. Wipe the spot and let it dry, and if it never dries, label it while the line is off or use a dry surface beside it.

A service tag is a form, not a logo with space left over. Lay it out as one, and it gets filled in.

3 to 5 years on a rooftop before the print starts to fade, longer in shade, and the design choices that decide where in that range you land.

Almost every HVAC sticker that lifts failed because of the surface, not the print. Dirt, cold, condensation, and powder coat are all fixed before the sticker leaves its backing.

Window Cling holds to smooth glass by static instead of adhesive, so it comes off and goes back up without leaving residue. It comes in White or Clear, and it belongs on smooth glass, inside facing out.

A Sticker Sheet is several stickers kiss-cut on one backing, laid out by you, at 4" × 6", 5" × 7", or 8.5" × 11". A Sticker Pack is separate stickers, one of each design, in a bag with a header card. Sheets start at 50, and packs at 25.

A QR code scans when it's big enough for the distance, has clear space around it, is dark on a light background, and has been tested on the proof. All four are settled before printing.

Warm it with a hair dryer, then peel it slowly, folded back almost flat against itself. Isopropyl alcohol takes off most leftover adhesive. Our standard vinyl is made to peel off cleanly.

Clean the exact spot with isopropyl alcohol, apply at room temperature, hinge the sticker on from one edge, and press the edges hard. Then give it 24 hours before it gets wet and 48 hours before anything scrubs it.