Here are some general guidelines on our artwork requirements for custom stickers and labels.

Resolution requirements

Artwork should be vector files or raster images with at least 300 PPI (Pixels Per Inch). If your artwork is below 300 PPI, we’ll reach out during proofing to work with you.

Acceptable file formats

We accept most file formats, the most common of which are listed below. If you upload an incompatible file, we’ll reach out during proofing to work with you.

• Vector types: Illustrator, PDF, EPS, SVG, SketchApp
• Raster types: PNG, JPG/JPEG, TIF/TIFF, PSD, PDF
• Other programs: DOC/DOCX, PPT/PPTX

Border requirements (minimum and standard size)

Artwork will be proofed with our standard border size. If you’d like a smaller border size, please specify this when you upload your artwork.

• Our standard border size is .1” (1/10”)
• Our minimum border requirement is .0625 (1/16”)

Bleed requirements

If you’d like your artwork to have a bleed, we have a bleed requirement of .0625 (1/16”) surrounding the cutline. This cannot be changed. Please note that not all artwork will qualify for full-bleed printing.

Cut line requirements

If you’d like to indicate a specific cut line, we recommend doing so with a .05 - 1 pt magenta stroke. This does not need to be on a separate layer or named “cut line”.

It is not necessary to specify a cut line.

Font size requirements:

We recommend a minimum font size of 6pt for adequate legibility. If your font size is illegible, we'll reach out during proofing to work with you.

Line thickness requirements:

We recommend a minimum line thickness of 1 pt to ensure quality and legibility. If your line is illegible, we'll reach out during proofing to work with you.

Color requirements

To ensure the closest match to your desired color for print, we recommend CMYK colors.